I really love DIY projects, and today’s post actually came about accidentally. I’ve had this beautiful, vintage bucket for about a year now, and I’ve been struggling to find the perfect solution for it. I’ve tried using it as a bucket for dog toys, flowers and even in my studio. However, it just didn’t work. Crazily enough though, while I was despising my hallway light it occurred to me that the bucket would make a better ceiling fixture than a container. And voila! The DIY rustic and industrial bucket light project was on its way.
Here are a few pictures of the hallway light situation that just was not my style.
You can’t see it from these pictures very well, but the light fixture is coated with a film of tar from the previous owners smoking addiction. It’s crazy how much older it makes the fixture look then it really is!
Isn’t this bucket glorious? I don’t know what it is about it, but I’ve loved it from the moment I saw it. I’m a dork, I know.
So, I started off with removing the glass fixture and hardware.
I was actually hoping that I could just remove the old fixture, install the bucket to the ceiling and have a huge bulb dangling like a pendant light. Unfortunately though, the way that it was installed to the ceiling made it a little more complicated than expected.
For this project I had to enlist Mike to “assist” with the electrical debacle. If you also have a similar situation, PLEASE, please, please make sure to have someone help you remove the light if you do not have any experience in the electrical field.
Since I had to change my plans from my original idea I decided to paint the old fixture and hardware, and bleach/scrub the glass.
I decided that easiest and quickest way to change the color would be to pull out the handy-dandy spray paint. I absolutely love Rust-oleum’s Oil Rubbed Bronze. It’s that perfect blend of a metal-look plus a nice, dark color without being black.
As always, make sure to do your spray painting outdoors, or at least in a ventilated garage/room. I also like to use an old canvas to protect my table from the paint, but you can easily use newspaper or cardboard as well. Then, tape off any areas that you do not want to get paint on.
The key to spray painting is to sand off any debris, old paint, etc from your item(s), and then do multiple light coats. When you do thick coats of paint that’s when you’ll have drips and peeling issues.
Doesn’t this fixture already look completely different?!?
Once the light fixture was completely dry (depending on the spray paint that you use you might need to wait 24 hours) we outlined a circle to cut out from the bucket. This way, the bucket will fit perfectly around the light fixture when it is installed into the ceiling.
Since metal can be a little tough I had Mike cut out the circle for me. He first drilled a whole into the bucket so he would have a starting point to put the saw.
Since the edges were a little sharp he used a grinder to smooth them down a little bit.
Then, we made sure the hole was indeed big enough to fit the light fixture. Bingo, we did it right!
Mike then put all of the pieces back together, and installed the light as it originally looked. Doesn’t the paint job make it look amazing? It looks brand new!
I then put the bucket on the ceiling, drilled holes into the bucket and ceiling, and got ready to put in the screws.
I highly recommend using drywall hangers to install your bucket. Our bucket wasn’t that heavy, but I wanted to make sure that it was securely fastened to the ceiling so we wouldn’t have to wonder about it falling down on anyone in the future.
Last, the bucket was installed!
At first I was a little unsure, but I now LOVE the way this light fixture looks. It’s the perfect blend of rustic and industrial that we plan on decorating with throughout the entire house.
One light down, 20 more to go… !
Want more inspiration? Check out this upcycled pendant light!
Have a great weekend!